Incoloy 800H Nickel Alloy Bar (UNS N08810)
Incoloy 800H Nickel Alloy Introduction
Incoloy 800H alloy bar (UNS N08810) is an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep rupture strength. The higher strength results from close control of carbon, aluminum, and titanium contents in conjunction with a high-temperature anneal.
Incoloy 800H Alloy Bar Characteristics
- Added Carbon and annealing treatment allows for higher creep and rupture properties above 1100℃F (600℃)
- Resistant to high-temperature corrosion
- Best joined/welded using products for high-temperature situations
|
|
|
|
44 |
|
|
32 |
|
|
21 |
|
|
1 |
|
|
0.4 |
|
|
0.4 |
|
|
0.35 |
|
|
0.3 |
|
|
0.08 |
|
|
0.02 |
|
|
0.01 |
|
|
|
|
|
8.08 g/cm³ |
0.292 lb/in³ |
|
|
1371℃ |
2500℃F |
|
|
|
|
|
Tensile strength (typical annealed at 1149℃/2100℃F) |
531MPa |
77000 psi |
|
Yield strength (typical annealed at 1149℃/2100℃F, @ @strain 0.200%) |
200 MPa |
29000 psi |
|
Elongation at break (typical annealed at 1149℃/2100℃F, in 2") |
52% |
52% |
|
70 |
70 |
Incoloy 800H Alloy Bar Applications
- Valves, fittings, and other components exposed to corrosive attack from 1100-1800℃ F
- Heat-treating equipment
- Super-heaters and re-heaters in power plants
Popularne Tagi: Incoloy 800H, Alloy 800H, Nickel Alloy Bar, UNS N08810, high-temperature creep resistant bar, Fe-Ni-Cr alloy bar, furnace tube material, petrochemical bar
You Might Also Like
Wyślij zapytanie